1. Firmly(!) pinch and hold the ON/OFF button until you hear a beep.

2. Open the Find My app on your supported iPhone or iPad.

3. Select the "+" and tap "Add Other Item."

4. Once your Rhinokey Smartcard is detected, tap "Connect." Choose a name and emoji for your Smartcard, then tap "Continue."

All Smartcards come fully charged, inspected, and tested straight from the factory. Having any troubles? Try the instructions down below.

1. Make sure you're really pressing/pinching the ON/OFF button firmly—pinch the Smartcard as shown in the installation video. You should hear a sound.

2. Restart your iPhone. We've seen this help in several cases.

3. If you have a wireless charger, place the Smartcard on it. A red light should appear, indicating that it's charging. If you don't have a charger, continue to step 4.

4. Press the Rhinokey Smartcard's ON/OFF button four times rapidly, then hold it at the fifth time until you hear a ringing chime after about 6 seconds, then release the button. (If it does not make a sound, do step 1 again).

5. Wait 5 seconds. Then hold the button down for 3 seconds, until you hear a chime, then release the button. The card has now been reset and turned off.

6. After waiting for 5 seconds again, hold the button for 1 second to turn it back on again. At this point it can be paired again in the Apple Find My app.

This means your Rhinokey Smartcard is out of battery and needs to be recharged. Please follow the correct charging instructions to get it working again.

Need a charger? You can order one here: https://rhinokey.eu/products/rhinokey-magsafe-charger

First, watch the charging instruction video above.

Any 15W wireless charger designed for phones will work. Chargers meant for smartwatches won’t be compatible. Make sure to use a compatible power adapter. Plugging the wireless charger into a laptop won't always work.

On the back of the Smartcard, you’ll see a small wireless signal icon. That icon needs to be centered on the charging pad—not the middle of the Smartcard itself.

When placed correctly, the Smartcard will show a red light to indicate it’s charging. Once fully charged, the red light will turn off.

When your Smartcard is connected to the Apple Find My app, you can see its battery level underneath the name.

You’ll also receive a low battery notification when it’s time to recharge.

You may want to reset your Rhinokey Smartcard for some reason. Follow the instructions down below:

1. Please ensure "Lost Mode" is disabled in the Apple Find My app.

2. Remove your Rhinokey Smartcard from Find My app.

3. Scroll to the bottom of the screen and tap “Remove Item”

4. A summary will open, tap " Remove" to confirm. (If it takes to long to remove the item, continue to step 5).

5. Press the Rhinokey Smartcard's ON/OFF button four times rapidly, then hold it at the fifth time until you hear a ringing chime after about 6 seconds, then release the button. (If it does not make a sound, do step 1 again).

6. Wait 5 seconds. Then hold the button down for 3 seconds, until you hear a chime, then release the button. The card has now been reset and turned off.

7. After waiting for 5 seconds again, hold the button for 1 second to turn it back on again. At this point it can be paired again in the Apple Find My app.